With the last bugfix : 6a2a10a154c9db39d5b3732e66685953e5f945e7 and when issuing a G28 or using the LCD option to home the printer, I get a Homing Failed / PRINTER HALTED. On pronterface, I get: SENDING:G28 Error:Printer halted. kill() called! [ERROR] Error:Printer halted. kill() called!
The printer is unusable.
The previous version I used : a0f8b25c1bd6826aa44edca4812a597dc433a13a does not have this issue. As there are around 30 commits between the 2 versions, I did not have yet the time to try to narrow down to the one which could be the problem.
Am I alone with this issue?
There is still posibillity i am not right, however commit under works, also last commit i tryied before the one i mentioned were like 3 up and it want working so.. i dont know now i use older version what i dont mind at all