Useful or not, from you.
Marlin [BUG]Reprap Discount Full Graphics Smart Controller Display is Garbled

Hello

I have downloaded 2.0 bugfix ,my display is an Reprap Discount Full Graphics Smart Controller Display . Problem with the display is that is garbled after flashing the firmware. That problem did I also have with version 1.9 and that is solved by the following instruction.

U8GLIB_ST7920_128X64_RRD u8g(0); // Number of stripes can be adjusted in ultralcd_st7920_u8glib_rrd.h with PAGE_HEIGHT              

 U8GLIB_ST7920_128X64_1X u8g(23,17,16); // Number of stripes can be adjusted in ultralcd_st7920_u8glib_rrd.h with PAGE_HEIGHT

The codes located in ultralcd_impl_DOGM.h The first line did I disabled en copy and adjusted in the second line . So did I fix that the display works . Did anyone a suggestion how to fix my problem in 2.0 ?

Printer is a Hypercube Evo with Arduino en Ramps board.

That's a useful answer
Without any help

Indeed forgot to mention that, did that as well. Delay 1 and 2 I've set to 20 and 3 to 70